Inart 3D Stretcher Bars and Braces 39x28mm

Inart 3D Stretcher Bars and Braces are produced from certified wood, in order to guarantee the preservation of the environment and sustainability of forests. Built from spruce, cone, these stretcher bars and braces offer a good resistance. Without knots, Inart Grids are ready for assembly, you just have to choose the measures and the respective structure. Quickly assembled, these stretcher bars have rounded edges with great finishes to prevent your canvas from being marked or creased. Its wedges system, allows you to stretch your canvas over time, that is, as time goes by and with temperature fluctuations, it can stay less strecheted and by hit the wedges it is immediately stretched, as new. For this system, you just have to fit the wedges (which you can order under the reference 119999025), in the cutouts of each corner of the grid and use its function when it needs. The wood braces, which are very important in the canvas structure, can be used as brace in the middle of the grid or as a crosspiece, which results from two wooden braces. Example - To compose a 100 x 90cm canvas with a 39x28mm grid, you have to order: 2 Stretcher Bars (39x28mm) 100cm + 2 Stretcher Bars (39x28mm) 100cm + a 90cm Wood Brace + a 90cm Wood Brace.