Do you need any help? Check out our Faq's
Ponto das Artes
The shopping cart is empty.
UHU Glue Epoxy Plus Quick tube
UHU Glue Epoxy Plus Quick tube
UHU Glue Epoxy Plus Quick tube
UHU Glue Epoxy Plus Quick tube

UHU Glue Epoxy Plus Quick tube

13,46 €uni.
UHU Epoxy Glue is composed of two components in a dosing syringe, it is transparent, fast, water resistant and very strong. Very resistant, this glue is suitable for crockery, porcelain, glass, leather, wood, stone, metal and ceramics, among themselves and in combination of materials. Not suitable for Polyethylene (PE), Polypropylene (PP), PTFE and silicone rubber. The hardening time depends on the temperature, the glue does not harden below +5ºC. Its finish is transparent, but can be painted and is quite resistant to impacts, and temperatures between -40°C and +100°C. Squeeze an equal amount of both components into the included mixing tray. Mix these two equal parts well with a synthetic spatula until the mixture obtained acquires a homogeneous color. Apply the mixture, which at room temperature (+20°C) remains workable for about 5 minutes, in a thin layer on one of the two materials. Assemble the materials and hold them in place for 20 minutes. Be careful not to move the pieces before the glue is dry. Resin and hardener must not come into contact with each other except for application. In case of residue and glue stains, you can remove with soap and water.
UHU Epoxy Glue is composed of two components in a dosing syringe, it is transparent, fast, water resistant and very strong. Very resistant, this glue is suitable for crockery, porcelain, glass, leather, wood, stone, metal and ceramics, among themselves and in combination of materials. Not suitable for Polyethylene (PE), Polypropylene (PP), PTFE and silicone rubber. The hardening time depends on the temperature, the glue does not harden below +5ºC. Its finish is transparent, but can be painted and is quite resistant to impacts, and temperatures between -40°C and +100°C. Squeeze an equal amount of both components into the included mixing tray. Mix these two equal parts well with a synthetic spatula until the mixture obtained acquires a homogeneous color. Apply the mixture, which at room temperature (+20°C) remains workable for about 5 minutes, in a thin layer on one of the two materials. Assemble the materials and hold them in place for 20 minutes. Be careful not to move the pieces before the glue is dry. Resin and hardener must not come into contact with each other except for application. In case of residue and glue stains, you can remove with soap and water.
Size: 2x15ml - Blister112237059
Stock
Out of format
13,46 €uni.