Marabu Yono Fine Bullet Marker

No matter the material, technique or design with YONO Markers, You Only Need One. Acrylic markers are suitable for painting on almost any material, as long as it is properly primed. Water-based colors have a satin finish (or matt depending on the material painted), opaque and lightfast, except for neon colors, which are semi-opaque and partially lightfast. The inks, while wet, can be mixed with each other or even used as watercolors. After drying, the paints are water resistant and can be painted in layers. It is very important shake the markers well, with the cap on, before each use. When using the marker for the first time, it is important that you shake it very well, with the cap on, lightly and continuously press the tip onto a test paper until the ink is visible on the tip. Once the tip is covered in paint, test its fluidity on the sketch and once it is ready, you can paint. After each use, close the marker and store it horizontally. To protect the paint, apply a varnish or in the case of fabric, you can fix it with the iron or bake at 150°C for 8 minutes. Round tip marker from 0,5mm to 1,5mm, ideal for details and lines. Discover the remaining tips by searching for YONO.