Facebook
Cart (0)0,00 €
Ponto das Artes
CategoriesBrands
Painting
Accessories Acrylic Watercolors Facial & Corpo Gouache Oil Oil Pastels Soft Pastels Pigments and Grounds Spray Ink Tempera Drawing Ink
Drawing
Colored Pencils Markers Erasers and Correction Graphite and Charcoal Conté and Monochrome Mechanical Pencils and Lead Refills Technical Drawing Rulers and Compasses Pranchetas e Estiradores Balsa Wood Sharpeners Models Accessories
Handwriting
Calligraphy Pens Chalk Markers
Brushes
Painting Brushes Brushes with Reservoir Storing and Organizing Cleaning and Accessories
Paper
Notebook Paper Pad Paper Sheets Roll Paper
Card and Cardboards
Carton Cardboards K-line
Canvas
Accessories Stretcher Bars & Braces Roll Canvas Canvas on Hardboards Stretched Canvas
Airbrushing
Airbrush Accessories Airbrush Airbrush Auxiliary Compressores Airbrush Paints
Decorative Arts
Decorative Accessories Multiusos Acessórios Decorativos Multiusos Others Porcelana Vidro Glass
Easels
Accessories Sketch Box Folding Studio Lira Table
Glues and Adhesives
Adhesives Glues
Cutting Tools
Cutting Accessories Blades Cutting Tools Cutting Matt Scissores X-Acto e Bisturis
Gilging and Restoration
Metals Ink Auxiliary Materials Accessories
Sculpture and Modeling
Modeling and Molds Equipments Boxes and Sets Auxiliary Materials Tools and Accessories
Gift
Stationary Others
Etching
Accessories Auxiliary Materials Boards Etching Presses Ink
Children
Accessories Pencils, Waxes and Markers Colouring Modeling Paste Ink
Folders and Portfolios
Folders and Cases Documents Holder Portfolios Tubes
Projection and Lighting
Projection Accessories Light Box Projectors
Suspension
Adaptable Accessories Wall Systems Ceiling Systems
return

121261007_11003678665f4e4fa2164da.jpg
+
Print Tell a Friend

Formalate Modellfix (Latexcreame)

In contrast to conventional latex, Formalate-Modellfix is ??creamy. This thick liquid latex is well suited for the coating of similarly shaped relief panels and for the reproduction of dioramas, architectural mockups, newly modeled clay plaques (reliefs, tomb panels, signs and models). There is no more suitable printing material than Creamy-Modellfix Latex, especially for molding clay models that are not completely dry, because it fits perfectly, capturing all details accurately. Can be easily removed after the latex mold harden. In the past similar models were covered with plaster to produce a negative mold which was then removed, washed and covered with petroleum jelly. Then new gypsum was prepared and laid in the mold. After hardening, a positive template was removed. All of this was very complicated because many of the molds left, getting destroyed. It would then have to be modeled a new piece of clay and the process would have to be repeated. That was in the past! Direct molding of the clay model with Formalate-Modellfix is ??not only easier but also safer. Formalate-Modellfix is ??applied on all sides and ends of the clay model to form a coating thickness of at least 12 mm and then lightly pressed with a flat wooden spatula to provide a smooth surface. Do not use paintbrushes as this can damage the structure of clay that is still soft. The latex layer on the clay model combines with it, absorbing the condensation produced during the hardening of the clay. This process even removes air bubbles that may have been created by the latex material, ensuring accurate molding accuracy. The latex layer takes about 5-6 days to dry. In this case, the moisture absorbed from the model, together with the water present in the latex, is eliminated, forming a stable, solid, coriaceous latex piece that can be easily removed from the still soft clay. The clay can then be used intact for other applications or prints. For large models, we recommend adding plaster bandages to the latex form to produce a more stable plaster reinforcement and facilitate filling, even with heavy molding materials. The final latex mold can be filled with any of the usual molding materials.
How to Make a Purchase?

Formalate Modellfix (Latexcreame)


121261007_11003678665f4e4fa2164da.jpg
+
Description
In contrast to conventional latex, Formalate-Modellfix is ??creamy. This thick liquid latex is well suited for the coating of similarly shaped relief panels and for the reproduction of dioramas, architectural mockups, newly modeled clay plaques (reliefs, tomb panels, signs and models). There is no more suitable printing material than Creamy-Modellfix Latex, especially for molding clay models that are not completely dry, because it fits perfectly, capturing all details accurately. Can be easily removed after the latex mold harden. In the past similar models were covered with plaster to produce a negative mold which was then removed, washed and covered with petroleum jelly. Then new gypsum was prepared and laid in the mold. After hardening, a positive template was removed. All of this was very complicated because many of the molds left, getting destroyed. It would then have to be modeled a new piece of clay and the process would have to be repeated. That was in the past! Direct molding of the clay model with Formalate-Modellfix is ??not only easier but also safer. Formalate-Modellfix is ??applied on all sides and ends of the clay model to form a coating thickness of at least 12 mm and then lightly pressed with a flat wooden spatula to provide a smooth surface. Do not use paintbrushes as this can damage the structure of clay that is still soft. The latex layer on the clay model combines with it, absorbing the condensation produced during the hardening of the clay. This process even removes air bubbles that may have been created by the latex material, ensuring accurate molding accuracy. The latex layer takes about 5-6 days to dry. In this case, the moisture absorbed from the model, together with the water present in the latex, is eliminated, forming a stable, solid, coriaceous latex piece that can be easily removed from the still soft clay. The clay can then be used intact for other applications or prints. For large models, we recommend adding plaster bandages to the latex form to produce a more stable plaster reinforcement and facilitate filling, even with heavy molding materials. The final latex mold can be filled with any of the usual molding materials.
How to Make a Purchase?
Reference Description   Price (VAT Incl.) Promotion Amount
Reference: 121261007 Size: 1L Color: --- Price: 34,01 € Promotion -- Amount


img-destaque-bottom-01_17779385885501d4ecaef25_356341335501ee5f9707c.png
Stretcher Bars and Canvas Make the stretcher bars and canvas budget here.
Ask for budget