Facebook
Cart (0)0,00 €
Ponto das Artes
CategoriesBrands
Pintura
Acrylic Facial & Corpo Oil Watercolors Tempera Gouache Soft Pastels Oil Pastels Pigments and Grounds Spray Drawing Ink Accessories
Brushes
Painting Brushes Brushes with Reservoir Storing and Organizing Cleaning and Accessories
Easels
Folding Studio Lira Table Sketch Box Accessories
Telas
Telas com grade Tela em MDF Roll Canvas Accessories
Paper
Paper Pad Paper Sheets Roll Paper
Drawing
Colored Pencils Marcadores Erasers and Correction Graphite and Charcoal Conté and Monochrome Mechanical Pencils and Lead Refills Technical Drawing Rulers and Compasses Pranchetas e Estiradores Balsa Sharpeners Models Accessories
Escrita
Calligraphy Pens Chalk Marcadores
Etching
Etching Presses Boards Inks Auxiliary Materials Accessories
Sculpture and Modeling
Modeling and Molds Equipments Boxes and Sets Auxiliary Materials Tools and Accessories
Dourar e Restauro
Metals Tintas Auxiliary Materials Accessories
Corte
X-Acto e Bisturis Scissores Cutting Matt Lâminas Ferramentas de Corte Cutting Accessories
Airbrushing
Airbrush Airbrush Paints Compressores Airbrush Auxiliary Airbrush Accessories
Glues and Adhesives
Adhesives Glues
Cartão e Cartolinas
Carton Cardboards K-line
Folders and Portfolios
Folders and Cases Portfolios Tubes Porta Documentos
Projection and Lighting
Light Box Projectors Projection Accessories
Suspensão
Wall Systems Sistemas de Tecto Adaptable Accessories
Artes Decorativas
Acessórios Decorativos Outros Porcelana Vidro Vidro Acessórios Decorativos Multiusos Multiusos
return

121261011_1728716093551579482ddab.jpg
+
Print Tell a Friend

Heat Resistant Silicone HB - Artidee

This environmentally vulcanized rubber silicone is easily recognizable as a heat resistant silicone because of its distinctive reddish color. It is preferred for the preparation of durable pewter molds. The silicone is thick but yet can be painted and shaped by having excellent fluidity. Due to its resistance to high temperatures, it can be mixed with high quality fills that ensure that the prepared molds are solid and stable. They are neither elastic nor extensible. For this reason, even simple brass plates can be modeled without recesses. As these molds are preferably used to fill with low melting point metal alloys such as brass or lead, these molds differ from other two-part molds, not only by color but also by the small and particularly narrow aperture, which normally, is accompanied by an even smaller one on the surface of the mold. This is due to the special molding techniques that use liquid metals. These should be fluid and should not cool for fill the mold to spread evenly and fill it fully. At the same time the air inside the mold should come out, which is done through the second opening. Because it is compatible with other Createc silicones, this silicone can be mixed with Elastic Silicone (Silcoflex HE). This creates an elastic, temperature-resistant silicone composition that enables the molding of complex models with large recesses. This ability has revolutionized pewter modeling technology that produces fantastic components, which were previously not possible with cold cure modeling materials. This results in totally plastic figures such as toy soldiers, Indians, historical portraits of people, animals, etc. Which have been traditionally modeled for many decadeslike flat brass figures and carefully painted. In addition, chess figures, Christmas decorations, belt buckles, buttons, decorative inlays for bottles and jars, brooches, wheels, small cannons, candle holders, mugs, plates, etc. are now possible. The forms of two or more parts prepared with Heat Resistant Silicone, are so durable and stable that they are allowed to make between 100 and 150 copies. This silicone is also suitable for the production of engravings with linoleum plates. Silicon plates with a uniform thickness of 5mm to 6mm are modeled and worked with linoleum cutting tools, after a reaction from 24h to 36 hours. If the hardness of the plate is not sufficient, fine quartz powder may be mixed with the silicone before mixing with the hardener. This makes the boards harder. The same technique is used to carve matrices for jewelery molds. However, for this purpose, silicone layers having a thickness of 6mm to 8mm are used. In addition, silicone molds can be made from jewelery for the manufacture of pendants and brooches. This silicone comes with the appropriate hardener, a mixing container and instructions for use.
How to Make a Purchase?

Heat Resistant Silicone HB - Artidee


121261011_1728716093551579482ddab.jpg
+
Description
This environmentally vulcanized rubber silicone is easily recognizable as a heat resistant silicone because of its distinctive reddish color. It is preferred for the preparation of durable pewter molds. The silicone is thick but yet can be painted and shaped by having excellent fluidity. Due to its resistance to high temperatures, it can be mixed with high quality fills that ensure that the prepared molds are solid and stable. They are neither elastic nor extensible. For this reason, even simple brass plates can be modeled without recesses. As these molds are preferably used to fill with low melting point metal alloys such as brass or lead, these molds differ from other two-part molds, not only by color but also by the small and particularly narrow aperture, which normally, is accompanied by an even smaller one on the surface of the mold. This is due to the special molding techniques that use liquid metals. These should be fluid and should not cool for fill the mold to spread evenly and fill it fully. At the same time the air inside the mold should come out, which is done through the second opening. Because it is compatible with other Createc silicones, this silicone can be mixed with Elastic Silicone (Silcoflex HE). This creates an elastic, temperature-resistant silicone composition that enables the molding of complex models with large recesses. This ability has revolutionized pewter modeling technology that produces fantastic components, which were previously not possible with cold cure modeling materials. This results in totally plastic figures such as toy soldiers, Indians, historical portraits of people, animals, etc. Which have been traditionally modeled for many decadeslike flat brass figures and carefully painted. In addition, chess figures, Christmas decorations, belt buckles, buttons, decorative inlays for bottles and jars, brooches, wheels, small cannons, candle holders, mugs, plates, etc. are now possible. The forms of two or more parts prepared with Heat Resistant Silicone, are so durable and stable that they are allowed to make between 100 and 150 copies. This silicone is also suitable for the production of engravings with linoleum plates. Silicon plates with a uniform thickness of 5mm to 6mm are modeled and worked with linoleum cutting tools, after a reaction from 24h to 36 hours. If the hardness of the plate is not sufficient, fine quartz powder may be mixed with the silicone before mixing with the hardener. This makes the boards harder. The same technique is used to carve matrices for jewelery molds. However, for this purpose, silicone layers having a thickness of 6mm to 8mm are used. In addition, silicone molds can be made from jewelery for the manufacture of pendants and brooches. This silicone comes with the appropriate hardener, a mixing container and instructions for use.
How to Make a Purchase?
Reference Description   Price (VAT Incl.) Promotion Amount
Reference: 121261012 Size: 1Kg Color: --- Price: 54,67 € Promotion -- Amount
Reference: 121261011 Size: 500gr Color: --- Price: 30,91 € Promotion -- Amount


img-destaque-bottom-01_17779385885501d4ecaef25_356341335501ee5f9707c.png
Stretcher Bars and Canvas Make the stretcher bars and canvas budget here.
Ask for budget
telas_w_n_9281262985a85a03e4bf09.jpg
NEWS Canvas Winsor & Newton
Learn More